Back to Positioners
Posicionador-de-cabezal-y-contrapunto

Headstock and Tailstock Positioners

Download more info
Categories: , ,

Description

All OTC DAIHEN positioners are controlled from the standard robot teaching pendant. Positioners are operated independently or synchronized with robot(s). High accuracy operation is made possible by the same AC servo motor and non-backlash reduction gear as our robots. Sleek, robust design allows for easy access and quick part removal.

  • Compact design can be integrated into a 1-axis positioner
  • Five attachment surfaces for quick system configuration changes
  • Center hole can be used to route cables and hoses
  • Optional air rotary joint, cable, and tail stock
  • Applicable for all welding and cutting processes
  • 500 amp ground connection for welding
  • Synchromotion control with OTC DAIHEN robots

Especificaciones

Model Number

A2PB-250

A2PB-500

A2PB-1000

Maximum Payload Capacity

250 Kg

500 Kg

1000 Kg

Rotating Speed

2.6 rad/s (150°/sec)

2.1 rad/s (120°/sec)

1.3 rad/s (172°/sec)

Allowable rotating moment

206 N•m

490 N•m

1078 N•m

Positional repeatability

±0.1 mm
(Position at R200mm)

±0.1 mm
(Position at R200mm)

±0.1 mm
(Position at R200mm)

Stop Position

Any Position

Any Position

Any Position

Mass(Weight)

110Kg

170Kg

220Kg

Related products

FD-V25
FD-V25
25kg payload, 1.71m reach Our FD-V25, 6-axis robot is designed for arc welding, cutting and material-handling applications that require a larger payload.  Built-in application signal cable simplifies integration and installation. [btn text="Download more information" tcolor=#FFF bcolor=#004098 thovercolor=#FFF link="https://daihen.mx/wp-content/uploads/2020/06/FD-V25-HAND-Eng-a.pdf" target="_blank"] [btn text="FD19 Controller" tcolor=#FFF bcolor=#004098 thovercolor=#FFF link="https://daihen.mx/wp-content/uploads/2020/06/FD_19_Catalog_E.pdf" target="_blank"]
Read more
WB-W400 AC-MIG
WB-W400 AC-MIG
Our 400A dual-inverter-based weld power source delivers AC-MIG welding with both WavePulse and AC WavePulse capability.  This Welbee W400 is ideal for application requiring precise control of the heat input to the substrate in balance with the heat input to the welding wire. [btn text="Technical info" tcolor=#FFF bcolor=#004098 thovercolor=#FFF link="https://daihen.mx/wp-content/uploads/2020/06/Ficha-tecnica-WB-W400.pdf" target="_blank"]
Read more
Synchro-Feed GMA
Synchro-Feed GMA
Synchro-feed GMA welding technology is an exclusive product of OTC DAIHEN enabled by the tightest integration and single-sourcing of networked robotics, weld power source, welding process and wire delivery system that virtually eliminates weld spatter.
  • Are rework and cleanup due to weld spatter an issue for your company?
  • Are the fit-up problems due to weld spatter slowing down your assembly process
  • Is weld appearance important to the image and value of your product?
Our Synchro-feed welding system can not only save you time and money, but allow you to produce even more product from the added efficiency it ensures. Synchro-feed welding is a GMA welding system that produces a high quality, high-speed welds with virtually no post-weld clean up required.  Via a welding process called PulseDip, it incorporates a servo-driven wire feeder within the torch body that advances the welding wire forward to create an arc and then very precisely retracts the wire while synchronizing with a specialized weld current waveform that extinguishes the arc to create consistent droplet transfer with virtually zero weld spatter.  This results in a very neat, precise weld laid down at a rate up to 100 inches (254 cm) per minute using a weld current up to 300 amps.   [btn text="Specifications" tcolor=#FFF bcolor=#004098 thovercolor=#FFF link="https://daihen.mx/wp-content/uploads/2020/06/synchro-feed.pdf" target="_blank"]
Read more
FD-TR
FD-TR
Need the highest degree of precision during robotic TIG arc welding? Upgrade your setup with DAIHEN’s FD-TR system, the leading edge real-time robotic tracking sensor used to maintain optimal welding conditions. By measuring arc voltage during welding, the FD-TR arc sensor moves the torch vertically in order to maintain the best possible constant arc length. Feedback is relayed via the tungsten electrode in the torch. [btn text="Download more information" tcolor=#FFF bcolor=#004098 thovercolor=#FFF link="https://daihen.mx/wp-content/uploads/2020/04/Sensing-Solutions.pdf" target="_blank"]  
Read more